WINDNTOWERPLATE BENDING MACHINE

1、Variable Center Distance: Each end of every lower roll of this machine can move horizontally independently. According to different requirements for workpiece diameters, any required center distance can be adjusted. Reducing the center distance between lower rolls enables better traction of steel plates, facilitating the bending of small-diameter products; increasing the center distance between lower rolls makes it easier to bend thick plates and enhances roundness correction capability. 2、One-step Forming: It is equipped with a plate end pre-bending function. A metal plate can be loaded in one go, and both plate end pre-bending and workpiece roll forming can be completed without turning the plate around. 3、The upper roll is the driving roll, with a maximum torque of 4,050,000 Nm. It adopts four-drive confluence transmission technology, and the forward and backward movement of the plate is realized through the forward and reverse rotation of the motor. 4、Shorter Straight Edge: The equipment is equipped with anti-slip measures for steel plates. All motors are fitted with instant braking devices, which allow the rolls to stop rotating accurately during the rolling process. Precise control minimizes the remaining straight edge. The hydraulic brake can respond rapidly, ensuring precise positioning of the plate end and preventing the steel plate from slipping off the machine. 5、Simple Foundation: It saves 30% of the foundation cost compared with similar models.