The plate bending machine is a kind of equipment that uses work rolls to bend and form sheet materials. It can form parts of different shapes such as cylindrical parts and conical parts. It is a very important processing equipment. The working principle of the plate bending machine is to make the work roll move through the action of hydraulic pressure, mechanical force and other external forces, so that the plate can be bent or rolled into shape.
Rolling bearing is a precision part of the 3 roller plate bending machine, so it is required to be cautious when using it. Correct use can not only achieve the expected performance effect, but also prolong the running time and service life of the 3 roller plate bending machine bearing.
1. To prevent the rust of the bearing of the 3 roll plate bending machine, when taking the bearing directly by hand, fully wash the sweat from the hand, and apply high-quality mineral oil before operating. In the rainy season and summer, special attention should be paid to rust prevention.
2. The rolling bearing of the 3 roller plate bending machine should be used and installed carefully. Strong stamping is not allowed, the bearing is not allowed to be hit directly with a hammer, and the pressure is not allowed to be transmitted through the rolling elements.
3. Use appropriate and accurate installation tools, try to use special tools, and try to avoid the use of cloth and short fibers.
4. Keep the bearing and its surrounding environment clean. Even tiny dust invisible to the naked eye enters the bearing, which will increase bearing wear, vibration and noise.
The 3 roll plate bending machine is suitable for bending deformation of metal plates, and can roll round, arc and conical workpieces within a certain range. It has the function of pre-bending the plate ends. Three roll bending machine has mechanical and hydraulic: mechanical 3 roll plate bending machine is divided into symmetrical and asymmetrical. Sheet metal can be rolled into circular, curved and conical workpieces within a certain range. What are the ways to use it to improve efficiency?
1. Check that the 3 roller plate bending machine and connecting screws are loose, and the belt is normal.
2. During operation, pick up the dropped material at the interface of the 3 roll plate bending machine furnace in time.
3. Check whether the 3 roll plate bending machine falls off and whether the joints are in good condition. Adjust and repair in time.
4. The maintenance worker should add oil to each part in time, check whether there is abnormal movement of each machine in time, deal with it in time, check whether each part is missing in time, and make up for it in time.